jammr Forum

Hi!

I am using jammr in combination with supercollider - an application used for coding music/sounds. I'm not at music yet ^^

Even so, after stopping my application - I am not sending anymore sound to jammr - there is still a 30 sec( at least) echo of what I had just recently played.

My settings are:
-Windows 7 and 8(the problem occurs on both systems);
-virtual cable in and out;
-44100, 5.8;
-Windows Wasapi.

Is there some problem with my settings or am I missing something?
I need to mention that this problem is relatively new, maybe since the latest upgrade that jammr got. Until then, these setting had been okay.

Thanks for your help!

alex

alotofkittens
after stopping my application - I am not sending anymore sound to jammr - there is still a 30 sec( at least) echo of what I had just recently played

Hi alotofkittens,
How many instances of jammr are you running?

If you are using a second jammr instance to listen to what you played, then you will hear audio with a 1-interval delay.

The following setup should be used:
1. Supercollider output is the virtual cable. Supercollider does not play any audio to your speakers/headphones.
2. jammr input is the virtual cable and the output is your speaker/headphones. The “Play back my audio” checkbox must be enabled in the sound settings.

When you play sounds in Supercollider you should hear them instantly (coming through jammr).

Hope this helps,
Stefan

Hi Stefan,

Just changed to the settings you suggested and it works just fine.
Thank you very much for your help!

alotofkittens
Just changed to the settings you suggested and it works just fine.

Awesome. Looking forward to jamming with you!

Stefan