jammr Forum

My set up is with a Behringer UCA222 and I am connecting my Bass through a Behringer XENYX 1202FX
This all seem s to work fine, I can hear my Bass at the output of the UCA222 on headphones, and if I start my Wavepad sound editor software I can record my audio without issue. This seems to all work fine.

When I start Jammr I log in no issues but when I try to start a jam I get an error message:
A problem starting Audio
I have looked at settings but only see microphone settings am not seeing theUCA222
here is my log:
Apr 03 2020 11:16:09 DEBUG: jammr 1.2.8 (44212a597aad70c42bf8fe74aaf4e112d7c81e02)
Apr 03 2020 11:16:09 DEBUG: CPU architecture 32-bit little-endian
Apr 03 2020 11:16:09 DEBUG: OS: Windows 10
Apr 03 2020 11:16:09 DEBUG: Qt 5.7.0
Apr 03 2020 11:16:09 DEBUG: PortAudio V19.6.0-devel, revision 396fe4b6699ae929d3a685b3ef8a7e97396139a4
Apr 03 2020 11:16:09 DEBUG: Host API: MME (6 devices)
Apr 03 2020 11:16:09 DEBUG: “Microsoft Sound Mapper - Input” (0)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: “Microphone (USB Audio CODEC )” (1)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: “Microphone Array (Realtek High ” (2)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: “Microsoft Sound Mapper - Output” (3)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: “Speakers (USB Audio CODEC )” (4)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: “Speaker/HP (Realtek High Defini” (5)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 03 2020 11:16:09 DEBUG: Host API: Windows DirectSound (6 devices)
Apr 03 2020 11:16:09 DEBUG: “Primary Sound Capture Driver” (6)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.12 low, 0.24 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: “Microphone (USB Audio CODEC )” (7)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.12 low, 0.24 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: “Microphone Array (Realtek High Definition Audio)” (8)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.12 low, 0.24 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: “Primary Sound Driver” (9)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.12 low, 0.24 high
Apr 03 2020 11:16:09 DEBUG: “Speakers (USB Audio CODEC )” (10)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.12 low, 0.24 high
Apr 03 2020 11:16:09 DEBUG: “Speaker/HP (Realtek High Definition Audio)” (11)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.12 low, 0.24 high
Apr 03 2020 11:16:09 DEBUG: Host API: Windows WASAPI (4 devices)
Apr 03 2020 11:16:09 DEBUG: “Speakers (USB Audio CODEC )” (12)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 48000 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.003 low, 0.01 high
Apr 03 2020 11:16:09 DEBUG: “Speaker/HP (Realtek High Definition Audio)” (13)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 48000 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.003 low, 0.01 high
Apr 03 2020 11:16:09 DEBUG: “Microphone Array (Realtek High Definition Audio)” (14)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 48000 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.003 low, 0.01 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: “Microphone (USB Audio CODEC )” (15)
Apr 03 2020 11:16:09 DEBUG: Channels: 1 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.003 low, 0.01 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0 low, 0 high
Apr 03 2020 11:16:09 DEBUG: Host API: Windows WDM-KS (4 devices)
Apr 03 2020 11:16:09 DEBUG: “Speakers (USB Audio CODEC)” (16)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.01 low, 0.0853333 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.01 low, 0.0853333 high
Apr 03 2020 11:16:09 DEBUG: “Microphone (USB Audio CODEC)” (17)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.01 low, 0.0853333 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.01 low, 0.0853333 high
Apr 03 2020 11:16:09 DEBUG: “Speakers (Realtek HD Audio output)” (18)
Apr 03 2020 11:16:09 DEBUG: Channels: 0 in, 2 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.01 low, 0.04 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.01 low, 0.04 high
Apr 03 2020 11:16:09 DEBUG: “Microphone Array (Realtek HD Audio Mic input)” (19)
Apr 03 2020 11:16:09 DEBUG: Channels: 2 in, 0 out
Apr 03 2020 11:16:09 DEBUG: Default sample rate: 44100 Hz
Apr 03 2020 11:16:09 DEBUG: Input latency: 0.01 low, 0.04 high
Apr 03 2020 11:16:09 DEBUG: Output latency: 0.01 low, 0.04 high
Apr 03 2020 11:16:09 DEBUG: PortMidi devices:
Apr 03 2020 11:16:09 DEBUG: “Microsoft MIDI Mapper” (OUT)
Apr 03 2020 11:16:09 DEBUG: “Microsoft GS Wavetable Synth” (OUT)
Apr 03 2020 11:16:09 DEBUG: Checking for updates from https://jammr.net/static/latest-windows.txt
Apr 03 2020 11:16:10 DEBUG: Update checker finished, current “1.2.8” latest “1.2.8”
Apr 03 2020 11:16:22 DEBUG: Logging in as “SmokeyBear” at https://jammr.net/api/tokens/SmokeyBear/
Apr 03 2020 11:16:23 DEBUG: Logged in successfully
Apr 03 2020 11:16:31 DEBUG: Trying Pa_OpenStream() with sampleRate 44100 inputLatency 0.0058 outputLatency 0.0058 innch 2 outnch 2
Apr 03 2020 11:16:31 DEBUG: Input device: Microphone (USB Audio CODEC) (Windows WDM-KS)
Apr 03 2020 11:16:31 DEBUG: Output device: Speakers (Realtek HD Audio output) (Windows WDM-KS)
Apr 03 2020 11:16:31 CRIT: Pa_OpenStream() failed: Invalid device
Apr 03 2020 11:16:31 CRIT: create_audioStreamer_PortAudio() failed
Apr 03 2020 11:25:06 DEBUG: Trying Pa_OpenStream() with sampleRate 44100 inputLatency 0.0058 outputLatency 0.0058 innch 2 outnch 2
Apr 03 2020 11:25:06 DEBUG: Input device: Microphone (USB Audio CODEC) (Windows WDM-KS)
Apr 03 2020 11:25:06 DEBUG: Output device: Speakers (USB Audio CODEC) (Windows WDM-KS)
Apr 03 2020 11:25:06 CRIT: Pa_OpenStream() failed: Invalid device
Apr 03 2020 11:25:06 CRIT: create_audioStreamer_PortAudio() failed

Attachments:
Error message.png (75.0 KB)

Hi,
Thanks for posting the log! Unfortunately I'm unable to suggest a solution. The settings you tried look like they should work. Maybe jammr 1.2.8 does not work with the UCA222. The next release of jammr will have audio updates that might solve the issue.

In the meantime I suggest trying another audio interface if you have access to one. There is also a chance that you might find a working combination of settings with the WASAPI or WDM-KS audio systems.

Sorry I can't help much further at the moment!