jammr Forum

Home of the jammr Community

  • You are not logged in.

#1 March 29, 2020 18:01:44

AmazingSimone
Registered: 2020-03-29
Posts: 1
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

Hallo I just launched jammr and want to configure my audio i/o and i am noticing there is no asio as a option in audio system so thats wierd. I have focusrite 2i2 2nd gen and if i choose anything than Windows WDM-KS the metronome is just not working (just stops at the begining) so yeah…

Edited AmazingSimone (March 29, 2020 18:02:29)

Offline

#2 March 29, 2020 19:06:54

WashedUpRokStar
Registered: 2020-03-29
Posts: 1
Reputation: +    -
Profile  

Audio interface problem

Same Problem but with a Tascam US-1800



Just an old man with a guitar and a pinch of swag.
Not sure about that second thing tho…

Offline

#3 March 30, 2020 02:37:43

mccordb
Registered: 2020-03-22
Posts: 3
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

I have a samson USB mic and yesterday it worked fine. today not at all. message is "there was a problem starting audio… What gives?

Offline

#4 March 30, 2020 13:04:57

Chris79
Registered: 2020-03-29
Posts: 3
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

Hi all,

Also Focusrite 2i2 here, working with Latency, like it does not support ASIO from scarlett.

??

Offline

#5 March 31, 2020 16:37:51

stefanha
Registered: 2012-11-11
Posts: 1730
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

Please copy-paste the technical information displayed when you go to Help | Show log and I will post recommendations on which settings to use.

Some general tips:
1. Usually “Windows WDM-KS” works best.
2. 44100 and 48000 Hz are the most common sample rates are are supported by many devices.
3. Latency should usually be set between 5-12 milliseconds so that you don't hear audio glitches.

Offline

#6 March 31, 2020 19:29:14

Chris79
Registered: 2020-03-29
Posts: 3
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

Μαρ 31 2020 19:25:59 DEBUG: Trying Pa_OpenStream() with sampleRate 48000 inputLatency 0.00533 outputLatency 0.00533 innch 2 outnch 2
Μαρ 31 2020 19:25:59 DEBUG: Input device: Focusrite USB (Focusrite USB Audio) (Windows WASAPI)
Μαρ 31 2020 19:25:59 DEBUG: Output device: Focusrite USB (Focusrite USB Audio) (Windows WASAPI)
Μαρ 31 2020 19:25:59 DEBUG: Stream started with sampleRate 48000 inputLatency 0.022 outputLatency 0.032

I hear to much latency, unplayable, even with Windows WDM-KS, worse.

Edited Chris79 (March 31, 2020 19:31:38)

Offline

#7 April 1, 2020 23:10:52

AV
Registered: 2020-04-01
Posts: 6
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

Hi!
I'm trying to connect with Blackstar ID:CORE comboamp, that is plugged in into my PC via USB. It's selected as my default input device in Windows and I can hear myself if I chose to play from this device. However, if I try to join the room I get the following error


and the log shows:
Apr. 01 2020 23:05:59 DEBUG: Logging in as “AV” at https://jammr.net/api/tokens/AV/
Apr. 01 2020 23:05:59 DEBUG: Logged in successfully
Apr. 01 2020 23:06:04 DEBUG: Trying Pa_OpenStream() with sampleRate 44100 inputLatency 0.0116 outputLatency 0.0116 innch 2 outnch 8
Apr. 01 2020 23:06:04 DEBUG: Input device: Digital Audio Interface (ID:Core Amplifier) (Windows WDM-KS)
Apr. 01 2020 23:06:04 DEBUG: Output device: Speakers (Realtek HD Audio output) (Windows WDM-KS)
Apr. 01 2020 23:06:04 CRIT: Pa_OpenStream() failed: Invalid device
Apr. 01 2020 23:06:04 CRIT: create_audioStreamer_PortAudio() failed

Edited AV (April 1, 2020 23:11:12)

Offline

#8 April 2, 2020 08:38:04

stefanha
Registered: 2012-11-11
Posts: 1730
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

Hi AV,
Please upload the full log from Help | Show log.

Thanks!

Offline

#9 April 2, 2020 08:41:37

stefanha
Registered: 2012-11-11
Posts: 1730
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

Chris79
Μαρ 31 2020 19:25:59 DEBUG: Trying Pa_OpenStream() with sampleRate 48000 inputLatency 0.00533 outputLatency 0.00533 innch 2 outnch 2Μαρ 31 2020 19:25:59 DEBUG: Input device: Focusrite USB (Focusrite USB Audio) (Windows WASAPI)Μαρ 31 2020 19:25:59 DEBUG: Output device: Focusrite USB (Focusrite USB Audio) (Windows WASAPI)Μαρ 31 2020 19:25:59 DEBUG: Stream started with sampleRate 48000 inputLatency 0.022 outputLatency 0.032I hear to much latency, unplayable, even with Windows WDM-KS, worse.

Hi Chris79,
I recommend enabling “Play back my audio” in jammr's sound settings and if your Focusrite interface has a monitor mix knob then please turn it so you only hear audio from the computer (no hardware monitoring). Your instrument should feel fine with the latency setting shown in the log (5 milliseconds).

Can you describe what you mean by latency?

Offline

#10 April 2, 2020 19:55:29

AV
Registered: 2020-04-01
Posts: 6
Reputation: +    -
Profile   Send e-mail  

Audio interface problem

апр. 02 2020 19:54:09 DEBUG: jammr 1.2.8 (44212a597aad70c42bf8fe74aaf4e112d7c81e02)
апр. 02 2020 19:54:09 DEBUG: CPU architecture 32-bit little-endian
апр. 02 2020 19:54:09 DEBUG: OS: Windows 10
апр. 02 2020 19:54:09 DEBUG: Qt 5.7.0
апр. 02 2020 19:54:09 DEBUG: PortAudio V19.6.0-devel, revision 396fe4b6699ae929d3a685b3ef8a7e97396139a4
апр. 02 2020 19:54:09 DEBUG: Host API: MME (9 devices)
апр. 02 2020 19:54:09 DEBUG: “�������������� �������� ����. - Input” (0)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: “��������� ��������� ����� (ID:C” (1)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: “������ ������ (Realtek High Def” (2)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: “Microphone (HD Webcam C270)” (3)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: “�������������� �������� ����. - Output” (4)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: “�������� (Realtek High Definiti” (5)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: “SAMSUNG (2- NVIDIA High Definit” (6)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: “��������� ��������� ����� (ID:C” (7)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: “Realtek Digital Output (Realtek” (8)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.09 low, 0.18 high
апр. 02 2020 19:54:09 DEBUG: Host API: Windows DirectSound (9 devices)
апр. 02 2020 19:54:09 DEBUG: “��������� ������� ������ �����” (9)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: “��������� ��������� ����� (ID:Core Amplifier)” (10)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: “������ ������ (Realtek High Definition Audio)” (11)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: “Microphone (HD Webcam C270)” (12)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: “��������� �������� �������” (13)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: “�������� (Realtek High Definition Audio)” (14)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: “SAMSUNG (2- NVIDIA High Definition Audio)” (15)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: “��������� ��������� ����� (ID:Core Amplifier)” (16)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: “Realtek Digital Output (Realtek High Definition Audio)” (17)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.12 low, 0.24 high
апр. 02 2020 19:54:09 DEBUG: Host API: Windows WASAPI (7 devices)
апр. 02 2020 19:54:09 DEBUG: “Динамики (Realtek High Definition Audio)” (18)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 48000 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.003 low, 0.01 high
апр. 02 2020 19:54:09 DEBUG: “SAMSUNG (2- NVIDIA High Definition Audio)” (19)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 48000 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.003 low, 0.01 high
апр. 02 2020 19:54:09 DEBUG: “Интерфейс цифрового звука (ID:Core Amplifier)” (20)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 4 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 48000 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.003 low, 0.01 high
апр. 02 2020 19:54:09 DEBUG: “Realtek Digital Output (Realtek High Definition Audio)” (21)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 48000 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.003 low, 0.01 high
апр. 02 2020 19:54:09 DEBUG: “Стерео микшер (Realtek High Definition Audio)” (22)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 48000 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.003 low, 0.01 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: “Microphone (HD Webcam C270)” (23)
апр. 02 2020 19:54:09 DEBUG: Channels: 1 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 48000 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.003 low, 0.01 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: “Интерфейс цифрового звука (ID:Core Amplifier)” (24)
апр. 02 2020 19:54:09 DEBUG: Channels: 4 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 48000 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.003 low, 0.01 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0 low, 0 high
апр. 02 2020 19:54:09 DEBUG: Host API: Windows WDM-KS (11 devices)
апр. 02 2020 19:54:09 DEBUG: “Output (NVIDIA High Definition Audio)” (25)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: “Line in at front panel (Green) (Line in at front panel (Green))” (26)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: “Speakers (Realtek HD Audio output)” (27)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 8 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: “Стерео микшер (Realtek HD Audio Stereo input)” (28)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: “Mic in at front panel (Pink) (Mic in at front panel (Pink))” (29)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: “Mic in at rear panel (Pink) (Mic in at rear panel (Pink))” (30)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: “SPDIF Out (Realtek HDA SPDIF Out)” (31)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 2 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: “Line in at rear panel (Blue) (Line in at rear panel (Blue))” (32)
апр. 02 2020 19:54:09 DEBUG: Channels: 2 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.04 high
апр. 02 2020 19:54:09 DEBUG: “Интерфейс цифрового звука (ID:Core Amplifier)” (33)
апр. 02 2020 19:54:09 DEBUG: Channels: 0 in, 4 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.0853333 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.0853333 high
апр. 02 2020 19:54:09 DEBUG: “Интерфейс цифрового звука (ID:Core Amplifier)” (34)
апр. 02 2020 19:54:09 DEBUG: Channels: 4 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 44100 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.0853333 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.0853333 high
апр. 02 2020 19:54:09 DEBUG: “Микрофон (HD Webcam C270)” (35)
апр. 02 2020 19:54:09 DEBUG: Channels: 1 in, 0 out
апр. 02 2020 19:54:09 DEBUG: Default sample rate: 48000 Hz
апр. 02 2020 19:54:09 DEBUG: Input latency: 0.01 low, 0.0853333 high
апр. 02 2020 19:54:09 DEBUG: Output latency: 0.01 low, 0.0853333 high
апр. 02 2020 19:54:09 DEBUG: PortMidi devices:
апр. 02 2020 19:54:09 DEBUG: “Microsoft MIDI Mapper” (OUT)
апр. 02 2020 19:54:09 DEBUG: “Microsoft GS Wavetable Synth” (OUT)
апр. 02 2020 19:54:10 DEBUG: Checking for updates from https://jammr.net/static/latest-windows.txt
апр. 02 2020 19:54:10 DEBUG: Update checker finished, current “1.2.8” latest “1.2.8”
апр. 02 2020 19:54:13 DEBUG: Logging in as “AV” at https://jammr.net/api/tokens/AV/
апр. 02 2020 19:54:13 DEBUG: Logged in successfully
апр. 02 2020 19:54:17 DEBUG: Trying Pa_OpenStream() with sampleRate 44100 inputLatency 0.0058 outputLatency 0.0058 innch 2 outnch 8
апр. 02 2020 19:54:17 DEBUG: Input device: Digital Audio Interface (ID:Core Amplifier) (Windows WDM-KS)
апр. 02 2020 19:54:17 DEBUG: Output device: Speakers (Realtek HD Audio output) (Windows WDM-KS)
апр. 02 2020 19:54:17 CRIT: Pa_OpenStream() failed: Invalid device
апр. 02 2020 19:54:17 CRIT: create_audioStreamer_PortAudio() failed

Offline

Board footer

Moderator control

Powered by DjangoBB

Lo-Fi Version