My setup is MAC OS if that matters.

I am running two synth into my Soundcraft Signature 22 board: AKAI Force and Novation Bass Station using regular TS style cables.

Have my gain cranked on both to make sure it is high enough. Nothing

Have Microphone setup running into same board. People can hear the Mic, but they cannot hear the instruments…

Settings in JAMMR are set to send and receive through Soundcraft board.

What else can I do?

Thanks

Hi spoofofallspoofs,
jammr only records the first mono/stereo channel. There is currently no way to route additional channels in software. If your Soundcraft Signature 22 presents multiple audio devices to the computer then this will be the reason why you only hear the mic.

Does the mixer have internal routing so you can combine the mic and synths into one channel?

OK intersting, i'll try that later and report back here to let you know if it works!

Thanks for the tip stefanha. I can only send from channel 1 on my board into Jammr. I have therefore setup a second mixer for my synthesizers that runs into the first channel.