jammr Forum

Hi,
I'm trying to run Jammr on a 12 year old HP laptop running Windows 10. I am trying to use an external mic that I use for singing.

I can see the various jams, but when I try to connect to one of them, I get an error message saying that it failed to start audio. It states that I should check to make sure that the audio device is connected. It is, and it is working as I can see it when I check it in Windows.

I am currently running Windows WDM-KS as the audio system in settings. I've tried the other settings but they are not working either.

I would appreciate any suggestions that you could offer. Thanks.

Hi alansj,
Please go to Show Log and copy-paste the technical information that gets displayed onto the forum so I can recommend sounds settings.

Hi Stefanha,

Here is what the log shows:

Apr 11 2020 20:37:03 DEBUG: jammr 1.2.8 (44212a597aad70c42bf8fe74aaf4e112d7c81e02)
Apr 11 2020 20:37:03 DEBUG: CPU architecture 32-bit little-endian
Apr 11 2020 20:37:03 DEBUG: OS: Windows 10
Apr 11 2020 20:37:03 DEBUG: Qt 5.7.0
Apr 11 2020 20:37:03 DEBUG: PortAudio V19.6.0-devel, revision 396fe4b6699ae929d3a685b3ef8a7e97396139a4
Apr 11 2020 20:37:03 DEBUG: Host API: MME (4 devices)
Apr 11 2020 20:37:03 DEBUG: “Microsoft Sound Mapper - Input” (0)
Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 11 2020 20:37:03 DEBUG: “Microphone 1 (High Definition A” (1)
Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 11 2020 20:37:03 DEBUG: “Microsoft Sound Mapper - Output” (2)
Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 11 2020 20:37:03 DEBUG: “Speakers (High Definition Audio” (3)
Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.09 low, 0.18 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.09 low, 0.18 high
Apr 11 2020 20:37:03 DEBUG: Host API: Windows DirectSound (4 devices)
Apr 11 2020 20:37:03 DEBUG: “Primary Sound Capture Driver” (4)
Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.12 low, 0.24 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0 low, 0 high
Apr 11 2020 20:37:03 DEBUG: “Microphone 1 (High Definition Audio Device)” (5)
Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.12 low, 0.24 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0 low, 0 high
Apr 11 2020 20:37:03 DEBUG: “Primary Sound Driver” (6)
Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0 low, 0 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.12 low, 0.24 high
Apr 11 2020 20:37:03 DEBUG: “Speakers (High Definition Audio Device)” (7)
Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0 low, 0 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.12 low, 0.24 high
Apr 11 2020 20:37:03 DEBUG: Host API: Windows WASAPI (2 devices)
Apr 11 2020 20:37:03 DEBUG: “Speakers (High Definition Audio Device)” (8)
Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 48000 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0 low, 0 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.0026667 low, 0.01 high
Apr 11 2020 20:37:03 DEBUG: “Microphone 1 (High Definition Audio Device)” (9)
Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.0029025 low, 0.0101587 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0 low, 0 high
Apr 11 2020 20:37:03 DEBUG: Host API: Windows WDM-KS (3 devices)
Apr 11 2020 20:37:03 DEBUG: “Speakers (HD Audio Headphone/Speakers)” (10)
Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.01 low, 0.04 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.01 low, 0.04 high
Apr 11 2020 20:37:03 DEBUG: “Microphone (HD Audio Microphone)” (11)
Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.01 low, 0.04 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.01 low, 0.04 high
Apr 11 2020 20:37:03 DEBUG: “Microphone (HD Audio Microphone 2)” (12)
Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 out
Apr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 Hz
Apr 11 2020 20:37:03 DEBUG: Input latency: 0.01 low, 0.04 high
Apr 11 2020 20:37:03 DEBUG: Output latency: 0.01 low, 0.04 high
Apr 11 2020 20:37:03 DEBUG: PortMidi devices:
Apr 11 2020 20:37:03 DEBUG: “Microsoft MIDI Mapper” (OUT)
Apr 11 2020 20:37:03 DEBUG: “Microsoft GS Wavetable Synth” (OUT)
Apr 11 2020 20:37:04 DEBUG: Checking for updates from https://jammr.net/static/latest-windows.txt
Apr 11 2020 20:37:12 DEBUG: Update checker finished, current “1.2.8” latest “1.2.8”
Apr 11 2020 20:37:15 DEBUG: Logging in as “alansj” at https://jammr.net/api/tokens/alansj/
Apr 11 2020 20:37:16 DEBUG: Logged in successfully
Apr 11 2020 20:37:36 DEBUG: Trying Pa_OpenStream() with sampleRate 44100 inputLatency 0.0058 outputLatency 0.0058 innch 2 outnch 2
Apr 11 2020 20:37:36 DEBUG: Input device: Microphone (HD Audio Microphone 2) (Windows WDM-KS)
Apr 11 2020 20:37:36 DEBUG: Output device: Speakers (HD Audio Headphone/Speakers) (Windows WDM-KS)
Apr 11 2020 20:37:36 CRIT: Pa_OpenStream() failed: Device unavailable
Apr 11 2020 20:37:36 CRIT: create_audioStreamer_PortAudio() failed

Thanks for your help.

alansj
Hi Stefanha,Here is what the log shows:Apr 11 2020 20:37:03 DEBUG: jammr 1.2.8 (44212a597aad70c42bf8fe74aaf4e112d7c81e02)Apr 11 2020 20:37:03 DEBUG: CPU architecture 32-bit little-endianApr 11 2020 20:37:03 DEBUG: OS: Windows 10Apr 11 2020 20:37:03 DEBUG: Qt 5.7.0Apr 11 2020 20:37:03 DEBUG: PortAudio V19.6.0-devel, revision 396fe4b6699ae929d3a685b3ef8a7e97396139a4Apr 11 2020 20:37:03 DEBUG: Host API: MME (4 devices)Apr 11 2020 20:37:03 DEBUG: “Microsoft Sound Mapper - Input” (0)Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.09 low, 0.18 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.09 low, 0.18 highApr 11 2020 20:37:03 DEBUG: “Microphone 1 (High Definition A” (1)Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.09 low, 0.18 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.09 low, 0.18 highApr 11 2020 20:37:03 DEBUG: “Microsoft Sound Mapper - Output” (2)Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.09 low, 0.18 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.09 low, 0.18 highApr 11 2020 20:37:03 DEBUG: “Speakers (High Definition Audio” (3)Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.09 low, 0.18 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.09 low, 0.18 highApr 11 2020 20:37:03 DEBUG: Host API: Windows DirectSound (4 devices)Apr 11 2020 20:37:03 DEBUG: “Primary Sound Capture Driver” (4)Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.12 low, 0.24 highApr 11 2020 20:37:03 DEBUG: Output latency: 0 low, 0 highApr 11 2020 20:37:03 DEBUG: “Microphone 1 (High Definition Audio Device)” (5)Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.12 low, 0.24 highApr 11 2020 20:37:03 DEBUG: Output latency: 0 low, 0 highApr 11 2020 20:37:03 DEBUG: “Primary Sound Driver” (6)Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0 low, 0 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.12 low, 0.24 highApr 11 2020 20:37:03 DEBUG: “Speakers (High Definition Audio Device)” (7)Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0 low, 0 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.12 low, 0.24 highApr 11 2020 20:37:03 DEBUG: Host API: Windows WASAPI (2 devices)Apr 11 2020 20:37:03 DEBUG: “Speakers (High Definition Audio Device)” (8)Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 48000 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0 low, 0 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.0026667 low, 0.01 highApr 11 2020 20:37:03 DEBUG: “Microphone 1 (High Definition Audio Device)” (9)Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.0029025 low, 0.0101587 highApr 11 2020 20:37:03 DEBUG: Output latency: 0 low, 0 highApr 11 2020 20:37:03 DEBUG: Host API: Windows WDM-KS (3 devices)Apr 11 2020 20:37:03 DEBUG: “Speakers (HD Audio Headphone/Speakers)” (10)Apr 11 2020 20:37:03 DEBUG: Channels: 0 in, 2 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.01 low, 0.04 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.01 low, 0.04 highApr 11 2020 20:37:03 DEBUG: “Microphone (HD Audio Microphone)” (11)Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.01 low, 0.04 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.01 low, 0.04 highApr 11 2020 20:37:03 DEBUG: “Microphone (HD Audio Microphone 2)” (12)Apr 11 2020 20:37:03 DEBUG: Channels: 2 in, 0 outApr 11 2020 20:37:03 DEBUG: Default sample rate: 44100 HzApr 11 2020 20:37:03 DEBUG: Input latency: 0.01 low, 0.04 highApr 11 2020 20:37:03 DEBUG: Output latency: 0.01 low, 0.04 highApr 11 2020 20:37:03 DEBUG: PortMidi devices:Apr 11 2020 20:37:03 DEBUG: “Microsoft MIDI Mapper” (OUT) Apr 11 2020 20:37:03 DEBUG: “Microsoft GS Wavetable Synth” (OUT) Apr 11 2020 20:37:04 DEBUG: Checking for updates from https://jammr.net/static/latest-windows.txtApr 11 2020 20:37:12 DEBUG: Update checker finished, current “1.2.8” latest “1.2.8”Apr 11 2020 20:37:15 DEBUG: Logging in as “alansj” at https://jammr.net/api/tokens/alansj/Apr 11 2020 20:37:16 DEBUG: Logged in successfullyApr 11 2020 20:37:36 DEBUG: Trying Pa_OpenStream() with sampleRate 44100 inputLatency 0.0058 outputLatency 0.0058 innch 2 outnch 2Apr 11 2020 20:37:36 DEBUG: Input device: Microphone (HD Audio Microphone 2) (Windows WDM-KS)Apr 11 2020 20:37:36 DEBUG: Output device: Speakers (HD Audio Headphone/Speakers) (Windows WDM-KS)Apr 11 2020 20:37:36 CRIT: Pa_OpenStream() failed: Device unavailableApr 11 2020 20:37:36 CRIT: create_audioStreamer_PortAudio() failedThanks for your help.

Could you be running some other software that takes ownership over the audio interface?
WDM-KS requires exclusive control over the audio interface.

ericharari: Thanks for helping. I agree, it's likely that another program already has one of the devices open and that is preventing jammr from using it.